| MARINE & INDUSTRIAL CHEMICALS . |
1.10 GREASE - OFF - Oil & grease remover |
Description :
GREASE OFF is a liquid compound which is a blend of aromatic solvents, wetting
agents, dispersing agents. It is very sffective in removing havy duty grease, oil and dirt etc., from oil tanks and decks. It can also be used for cleaning tanks which have been used
for any type of transportation of any type of animal or vegetable fat.
Chemical Properties :
| Appearance |
Thick flowing liquid |
| Colour |
Light to dark brown |
| pH of 10% sol. |
11.5 - 11.7 |
| Flash point |
None when diluted with water |
| Specific Gravity |
1.10 |
| Solubility |
Indefinite in water |
| Toxicity |
Low
- med. Alkaline. |
|
|
Method of Application :
Variety of washing systems can be adopted for tank cleaning e.g. machine, rock & roll or spot cleaning. |
|
Machine Washing :
- Use 2 to 3% GREASE
- OFF at 55 to 65ēC with continous stripping.(Inject correct
Volume of GREASE - OFF into the water line). Rinse tank with water at ambient temperature.
- For circulation : Make 2 to 3% solution in the circulation tank, heat at 55 to 65ēC (dependent on the type of soil) and proceed as above.
|
|
Rock & Roll :
Fill tanks to be cleaned with water adding GREASE - OFF during filling to ensure complete mixing and correct concentration. Keep heating coils on full
heat till correct temperature is reached. Strip tank after 24 hours and rinse. |
|
Manual Cleaning :
Use 5 to 10% concentration in hot water at about 55ēC and thoroughly scrub
the areas to be cleaned with brush. |
|
Safety Precautions :
Though mildly alkaline, rubber gloves and aprons are recommended while
working with Solution. In case of splash in eyes or on skin, wash with plenty of
fresh water. |
|
Packing :
40 Liters M.S. Drum/200 liters M.S.Drum |
RUSTKLEEN 58 - H.D. Rust remover |
Description :
RUSTKLEEN 58 is a heavy duty rust remover which should be used whenever rust or stains have formed, both to remove them and give
surface a temporary rust resisting top layer. It can be used on
decks, engine room, cargo holds etc. Also, it is used for removing
rust stains from wood, glass & ceramics etc. It conforms to the
defence specification DEF 37 as Rust Remover.
Chemical Composition :
Phosphoric acid based rust stripper with wetting and penetrating
agent suitably fortified with corrosion inhibitor or prevent attack
on bear metal.
Physical Properties :
| Appearance |
Liquid |
| Specific Gravity |
1.3 (min) |
| Colour |
Colourless to light reddish |
| pH of 10% sol. |
1.3 |
| Solubility |
Indefinte in water |
| Stability |
Indefinite |
| Toxicity |
Low highly acidic |
|
Method of Application :
To remove light deposits spray 25 % (V/V) solution of RUSTKLEEN 58. The process may be repeated at a
suitable interval till all the rust is removed or loose. The
surface is then brushed, washed clean and free of rust.
In case of heavy scales or rust, solution may be heated to 60ēC and then applied to parts.
For brush application 40 to 50 % solution is recommended. Apply the solution, allow it to react for 5 to 15
minutes and then rinse with water. It produces a flash phosphate
coating by reaction with oxide and a good base for painting also.
Packing :
40 Kg Plastic Carboys.
Precautions :
RUSTKLEEN 58 contains highly acidic ingredients and hence avoid contact with skin. Use rubber or PVC gloves for continous
working with solution.
Non - Warranty :
The information given in this bulletin is based on our experience
which we believe to be reliable but we cannot accept any responsi-
bility for operations not under our direct control. |
|
|
1.12
ARKLEEN 501 - Air cooler cleaner |
Description : During the operation, the fins and tubes of the main engine air
cooler which become fouled with oil, grease, dust and carbaceous
deposits which reduce the efficiency of air coolers, air
compressors, exhaust valves and other equipments.
ARKLEEN 501 penetrates the deposits, dissolves oil and grease
which can be washed away with water jet.
Chemical Composition :
ARKLEEN 501 is a combination of highly effective solvents,
detergents and corrosion inhibitors.
Physical Properties :
| Appearance |
Light brown liquid |
| Specific Gravity |
1.06 1.12 |
| Flash Point |
74ēC |
| pH of 10% sol. |
N.A. |
| Solubility |
Forms emulsion with water |
| Toxicity : |
Low |
Method of Application :
For in place without dismantling : Put sufficient quantity of
ARKLEEN 501 with 2 parts of water in a drum. By using a
suction hose connecting one end to spray distributor and other
to pump discharge, continously spray the parts till equipment is clean
by visual inspection. After cleaning, purge and vent the equipment
with air to remove solvent vapours. Rinse the equipment with water.
- Hand Spray : Remove air trunk or access door. Spray ARKLEEN
501 with a paint spray gun. When soiled parts are completely
saturated with solvent cleaner, apply water hose and wash the deposits
off the air cooler.
- For in
- service cleaning : In regular use 30 - 35 emulsion with
fresh water and may be sprayed to obtain minimum results.
|
Precautions :
Wear goggles and rubber gloves while handling. Avoid prolonged
breathing of vapours. In case of accidental splashing in eyes,
wash with planty of water.
Packing :
30 Liters/200 Liters drums.
Storage
Store away from open flame. |
|
|
1.13 ELKLEEN 705 - Electro cleaner |
Description :
ELKLEEN 705 is a solvent based degreasing chemical which is
used for cleaning of motors, starters, switchgears, generation
armatures, brushes, bearings, instruments etc. It can be used
where rapid and effective degreasing is required. It is safe to use
on all metals, glasses, painted surface etc. It has excellent
moisture repelling property and does not conduct electricity.
Methods of Application :
Spray or dip the parts in ELKLEEN 705 and remove the parts.
Chemical Properties :
It is a blend of organic solvents chosen for their excellent degreasing and cleaning properties, together with
their use in safety. This blend has got the evaporation rate equivalent
to carbon tetrachloride but is less toxic than it.
Physical Properties :
| Appearance |
Liquid |
| Colour |
Clear Water White |
| Flash Point |
120ēC |
| Odour |
Chlorinated Hydrocarbon |
| pH |
N.A. |
| Specific Gravity |
1.2 |
Packing :
40 Kg M.S. Drum
200 Kg. M.S. Drum
Non - Warranty
The information given in this bulletin is based on our experience
which we believe to be reliable but we cannot accept any
responsibility for operations not under our direct control. |
1.14 CARBKLEEN 515 - Carbon cleaner |
Description :
CARBKLEEN 515 is a chemical compound mainly used for cleaning all carbonised engine and machine parts. It also removes burnt oils, old paint residues and grease. |
Method of Application :Soaking of the parts is the most efficient method, however spraying or brushing directly on the parts will also remove the carbonised matter
ffectively. In case of very heavy deposits they should be allowed to soak for a longer period and if necessary they should be wirebrushed. Then the surface should
be completely wiped off with a clean cloth. CARBKLEEN 515
not only cleans the part but also provides a temporary barrier
against corrosion.
CARBKLEEN 515 can be stored in M.S. tank but as a safety precaution tank should be tightly covered with lid. To suppress the evaporation rate, a thin water barrier can be provided without affecting the quality.
Carbon can be removed without the use of any external heating
arrangement and hence no power is required. As it contains wetting an emulsifying agents, life of the product is prolonged. |
Packing :
40 Kg / 200 Kg Drums. |
Physical Properties :
| Appearance |
Liquid |
| Colour |
Reddish Brown |
| Solubility |
Indefinite in water |
| Specific Gravity |
1.18 |
| Flash Point |
Above 85ēC |
|
Handling Precaution :
Product is highly corrosive to skin. Use Face mask , gloves
and in case of accidental spillage wash with plenty of water,
seek medical advise in case of spillage in eye. (phenol Bums!!)
Non
- Warranty :
The information given in this bulletin is based on our
experience which we believe to be reliable but we cannot accept any responsibility for operations not under our
|
|
1.15 BITKLEEN 725 - Bilge & tank cleaner |
Description :
BITKLEEN 725 is a specially formulated product for cleaning the oil cargo and bilges. It is also effective in cleaning operations.
Chemical Composition :
A blend of aromatic, aliphatic and chlorinated hydrocarbon, wetting,
dispersing and emulsifying agents.
Physical Properties :
| Appearance |
Light yellow to brown Liquid. |
| Bulk Density |
See Specific Gravity |
| Fire Point |
75ēC |
| Flash Point |
45ēC |
| Odour |
Slight |
| Specific Gravity |
0.85 |
| Solubility |
disperses with water |
|
Method of Application :
- For Tank Cleaning : The correct volume of BITKLEEN 725 is dispersed over the surface and sufficient fresh or salt water is added to give the concentration of about 2 -3 %. The tank is filled in just above the normal working level. Contents of the tank are
then agitated by air or circulated by a pump at least for 24 hours. Heating by immersion heaters or steam may be necessitated in
certain areas.
- An Alternative Cleaning method which may be adopted to bilges or heavily soiled tanks involve spraying the contaminated surface by neat BITKLEEN 725 allowing the later to soak into soil
for about 1 hour and then hosing off with water. When cleaning
is completed the suspension of oil and water may be pumped to seperator vessel or centrifugal seperation may be employed.
|
Precautions
:
Being based on hydrocarbons solvents, the inhalation of vapours
for prolonged period may be avoided. Also, store away from the
open flame.
Packing :
30 ltrs carboys / 200 ltrs M.S. Drums.
Non - Warranty :
The information given in this bulletin is based on our experience which we believe to be reliable but we cannot accept any
responsibility for operation not under our direct control. |
|
|
1.16 TURNFREE 121 - Nut & bolt loosener |
|
|
1.17 LIQUEDET - Liquid detergent multi-
purpose. |
Description :
LIQUIDET is a multipurpose detergent combination, which is used for cleaning desks and rigs etc. It is a balanced type of surface active agent with skin care compound so that it minimises the effect on skin. The surface properties are matched in such a way
that it removes almost any type of oil,grease etc. However, the concentrated liquid on pointed surface over the long period may be
avoided.
Chemical Composition :
A blend of surface active agents, emulsifier, solubilizers and skin care compounds.
Physical Properties :
| Appearance |
Straw coloured viscous free |
| Specific Gravity |
1.03
- 1.08 |
| Active Matter |
16
- 20 % |
| Clear Point |
0ēC |
| pH of 1% solution |
7
- 7.5 |
|
Matter Insoluble In Water :
NIL
Application :
Spread concentrated LIQUIDET evenly on surface to be cleaned, brush it then flush the surface with water.
For cleaning hands etc., dilute one part of LIQUEDET with three parts of
water.
Packing :
35 LTS. CARB. / 200 LTS. BARREL.
Non -Warranty :
The information given in this bulletin is based on our experience which we believe to be reliable but we cannot
accept any responsibility for operations not under our direct control. |
|
|
1.18 O.S.D. 101 - Oil spill dispersant |
Description :
O.S.D. 101 forms the micro emulsion of oil in water in order to present maximum surface area for fast
biodegradation of chemicals. It is non - toxic product, yet gives the highest possible efficiency.
Chemical Composition :
It is a blend of surface agents of non- ionic type, with paraffinic
and hydrocarbon solvents.
Physical Properties :
| Appearance |
Clear & homogenous liquid by visual inspection. |
| Specific Gravity |
0.820 |
| Kinematic Viscosity at |
1.
0ēC .. 10.18 Centistokes.
2. 15ēC .. 6.78 Centistokes.
3. 25ēC .. 5.09 Centistokes. |
| Flash Point |
45ēC |
| Cloud Point |
- 10ēC |
| Solubility |
Completely soluble in Minerals& Petroleum
products. |
| Toxicity |
Non
- toxic |
|
|
Methods of Application : At Sea
O.S.D. 101 should be applied on an oil slick as a course spray so as
to give the even covering to an oil surface. Agitation should be done
vigorously which may be achieved by the agitation of a boat propeller
or by high pressure hoses.
Packing :
35 Ltrs / 200 Ltrs Plastic barrels.
Non
- Warranty :
The information given in this bulletin is based on our experience which we believe to be reliable but we cannot accept any responsibility
for operations not under our direct control. |
|
Next
Page >>> |
|
